Supports 25,000+ IC devices from 180+ IC manufacturers.
Supports low voltage devices with Vcc as low as 1.2v.
High programming throughput
USB 2.0 high-speed PC interface
Supports Windows XP / Vista / Windows 7
CE and RoHS compliant
EPROM PROGRAMMER FEATURES
DEVICE SUPPORT
IC Device types supported include:
FLASH memories, EPROMs, EEPROMs, Serial EEPROMs,
Configuration Serial PROMs, GALs, EPLDs, Firmware HUBs,
Microcontrollers, PICs, Standard Logic Devices, etc.
Supports standard DIP and skinny DIP packages from 8 to 48-pins
on standard equipment
Supports a wide variety of surface-mount devices (SMDs) and
other IC packages with reliable factory-made adapters.
Packages supported include:
PLCC, CLCC, SOIC, LAP, QFP, TQFP, VQFP, TSOP, TSOPII, SOP, PSOP, TSSOP,
SON, etc.
Free software updates can be downloaded via Internet at any time.
PROGRAMMER SPEED
Very fast programming speed via USB interface.
Programs and verifies a 64M-bit NOR flash memory device in 11.3 seconds
and a 64Mb EEPROM in 43 seconds.
The auto-start feature allows programming to start automatically
as soon as a chip is inserted into the programming socket.
Programming Speed Examples
IC Device Type
IC Device Manufacturer
IC Device Part #
Program and Verify
64Kb EEPROM
ATMEL
AT28C64B
0.9 SEC
128Kb SERIAL EEPROM
MICROCHIP
24AA128
4.5 SEC
20KB FLASH MCU
ATMEL
AT89C55
7.5 SEC
64Mb SPI EEPROM
SPANSION
S25FL064A
58.6 SEC
PIC MICRO
MICROCHIP
PIC16F876A
10.9 SEC
PIC MICRO
MICROCHIP
PIC18F442
6.2 SEC
PROGRAMMER HARDWARE
The programming unit has 48 universal pin-drivers built-in.
There is no need to add additional or optional pin-drivers
for programming devices of up to 48-pins.
Since each pin-driver is software programmable, proper voltage
levels will be applied to each and every pin, not just the Vcc pins,
allowing true low-voltage programming for low-voltage devices.
Reverse insertion check and pin continuity check help to
prevent devices from accidental damage.
Light-weight and portable, good for field applications and
international travel (takes 110V to 240V AC).
EASY-TO-USE PROGRAMMER SOFTWARE
Programmer-control S/W supports XP / Vista / Windows 7.
User-friendly software allows you to do these and more easily:
Read data from a master chip, put it in the data buffer
Save the data info t file
Program a new chip with this data
Erase a used EE chip before program it
Secure the chip so that others cannot copy it
Load data from a file instead of from a master chip
Display the data buffer on the screen and allow you to edit it
The Auto-program command allows you to
erase a chip, blank-check the chip, program it, and
verify it, all automatically with just one click.
The Project function simplifies operations for
your production people or yourself.
Settings such as device selection,
file name selection, device configuration, program options, etc.,
can be saved into project files.
Advanced functions allow you to do things that would be
impossible to do with other chip programmers. These include:
Data splits: 1-to-2, or 1-to-4, for
both byte-wide and word-wide devices.
Byte swap: for Intel or Motorola byte arrangements
Optionally do write-protection on selected sectors
Optionally do read-protection on selected blocks
Do specific device configurations for
Microchip PIC micros
Setup counters so that your operator can
easily keep track of how many chips have been
programmed.
Plus a whole lot more
EPROM PROGRAMMER SPECIFICATIONS
DEVICE SUPPORT
Device (IC) Types Supported:
EPROM, Paged EPROM, Parallel and Serial EEPROM, FPGA Configuration
Serial PROM, FLASH Memory (NOR), Firmware HUB, EPLD,
Microcontroller, Microchip PIC, etc.
Device Packages Supported on Standard Equipment:
DIP, SDIP.
Software and device algorithms are updated regularly.
Current software can be downloaded free of charge at
HERE
Updates are available by mail at a nominal charge.
HARDWARE & ELECTRICAL
PC interface: High speed USB 2.0
AC power supply: Input 100V-240V AC, 50/60 HZ.
Output 12VDC, 2 Amp.
Programmer physical size: 7" x 5" x 1 3/8" high
(178mm x 127mm x 35mm)
Net weight (programming unit, AC power supply, USB cable):
2 Lbs.
Gross shipping weight: 6 Lbs.
WARRANTY
2-years. Programmer is warranted to be free of manufacturing
or workmanship defects for two (2) years from the date of purchase.
Warranty covers parts, labor, and free UPS ground shipping from
Advin back to customer. (Free ground shipping applies to 48-states
and Canada only).
INCLUDED ITEMS
Programmer unit with 48-pin DIP ZIF socket adapter.
Cart
Buy this EPROM Programmer 
