UV EPROM Erasers, UV Wafer Erasing Cabinets, Spectronics UV Erasing Cabinet, Spectroline PC-Series

These large Spectronics UV erasers can be used for erasing EPROM-based chips on PC boards and wafers.

All use superior quality UV grid lamps which produce:

Accurate UV wave length spectrum.

Optimum and even distribution of UV light.

Up to four times the throughput of other UV erasers.

All models use accurate UV grid lamps:
UV eraser grid lamp

These large grid lamps generate 254 nm wave length UV lights. Typical UV Intensity= 18,500 琺 per cm²

UV Eraser Cabinet Models and Prices 230V / 60Hz with USA Plug
UV Eraser Model (Click on picture for details)	Eraser Inside Tray Dimensions Width x Length	Price
PC-4420A	32-3/8 x 12 x 1-3/8" (82.2 x 30.5 x 3.5 cm) Erases 12" wafers	Discontinued.
PC-8820C-LT (220v/60Hz) (Click for details)	32.4 x 26.8 x 1.4" (82.3 x 67.9 x 3.6 cm) Erases 3 x 12" wafers More info from manufacturer	$33,950 Or contact us at: sales@advin.com
PC-10020C-LT (220v/60Hz) (Click for details)	42 x 28 x 1.8" (106.7 x 71.1 x 4.4 cm) Erases 6 x 12" wafers More info from manufacturer	$39,950 Or contact us at: sales@advin.com

Erasing Time Required in Minutes
UV Eraser Model	Erasing energy required by EPROM
	6W-sec cm²	10W-sec cm²	15W-sec cm²
ALL PC Models	5.4	9.0	13.5
Erasing Time Calculation Formula Erase Time (Minutes) = Erasing eEnergy required by EPROM (W-sec/cm²) x 1,000,000 UV Intensity (琺/cm²) x 60

Note: All units are UL listed. Technical data subject to change.