|
|
|
SuperPro-5000 Universal IC Device Programmer
with Stand-alone Feature
(Programs EPROM, E/EPROM, Flash, Micro, Logic, and other IC Chips)
|
Carry case included
wuth programmer
|
Only $1875
Buy this Programmer
IC Devices Supported by Programmer
Programmer Adapters
|
Universal Programmer Datasheet
|
HIGHLIGHTS
- Supports 80,000+ IC devices from 290+ IC manufacturers.
- Capable of Stand-alone operation (requires optional CF card)
- Supports low voltage devices with Vcc as low as 1.2v.
- High programming throughput
- USB 2.0 high-speed PC interface
- Supports Windows XP / Vista / Windows 7
- CE and RoHS compliant
|
UNIVERSAL PROGRAMMER FEATURES |
DEVICE SUPPORT
- Supports 80,000+ IC devices from 290+ IC manufacturers.
- IC Device types supported include:
FLASH memories, EPROMs, EEPROMs, Serial EEPROMs, FPGA Configuration
Serial PROMs, NVRAMs, PLDs, CPLDs, EPLDs, Firmware HUBs,
Microcontrollers, PICs, Standard Logic Devices, etc.
- Supports standard DIP and skinny DIP packages from 8 to 48-pins
on standard equipment
- Supports a wide variety of surface-mount devices (SMDs) and
other IC packages with reliable factory-made adapters.
Packages supported include:
PLCC, CLCC, SOIC, LAP, QFP, TQFP, VQFP, TSOP, TSOPII, SOP, PSOP, TSSOP,
SON, BGA, EBGA, FBGA, etc.
- Free software updates can be downloaded via Internet at any time.
PROGRAMMER SPEED
- Ultra fast programming speed via USB interface.
- Programs high-density flash memory devices at near-theoretical
maximum programming speed.
- Programs and verifies a 64M-bit NOR flash memory in 11.3 seconds
and a 1G-bit NAND Flash in 108 seconds.
- The auto-start feature allows programming to start automatically
as soon as a chip is inserted.
| Programming Speed Examples |
| IC Device Type |
IC Device Manufacturer |
IC Device Part # |
Program and Verify |
| 64Mb NOR FLASH |
AMD |
AM29DL640G |
27.6 SEC |
| 512Mb NAND FLASH |
SAMSUNG |
K9F1208U0B |
67.4 SEC |
| 32KB Flash Micro |
ST |
72F324BK4B5 |
3.8 SEC |
| 1Gb NAND FLASH |
SAMSUNG |
K9F1G08U0A |
116.5 SEC |
| 64Kb EEPROM |
ATMEL |
AT28C64B |
0.9 SEC |
| 128Kb SERIAL EEPROM |
MICROCHIP |
24AA128 |
4.5 SEC |
| 20KB FLASH MCU |
ATMEL |
AT89C55 |
7.5 SEC |
ADVANCED PROGRAMMER HARDWARE
- Advanced hardware design provides clean signals and
allows programming of low-voltage devices reliably.
- The programming unit has 144 universal pin-drivers built-in.
There is no need to add additional or optional pin-drivers
even when you are programming large complex devices, up to 144-pins.
(As long as you have the proper package adapters.)
- Since each pin-driver is software programmable, proper voltage
levels will be applied to each and every pin, not just the Vcc pins,
allowing true low-voltage programming for low-voltage devices.
- Reverse insertion check and pin continuity check help to
prevent devices from accidental damage.
- Over-current and over-voltage protection ensures safety of the
devices and programmer hardware.
EASY-TO-USE PROGRAMMER SOFTWARE
- Programmer-control S/W supports XP / Vista / Windows 7.
- User-friendly software allows you to do these and more easily:
- Read data from a master chip, put it in the data buffer
- Save the data info t file
- Program a new chip with this data
- Erase a used EE chip before program it
- Secure the chip so that others cannot copy it
- Load data from a file instead of from a master chip
- Display the data buffer on the screen and allow you to edit it
- Plus a whole lot more
- The Auto-program command allows you to
erase a chip, blank-check the chip, program it, and
verify it, all automatically with just one click.
- The Project function simplifies operations for
your production people or yourself.
Settings such as device selection,
file name selection, device configuration, program options, etc.,
can be saved into project files.
- Advanced functions allow you to do things that would be
impossible to do with other chip programmers. These include:
- Data splits: 1-to-2, or 1-to-4, for
both byte-wide and word-wide devices.
- Byte swap: for Intel or Motorola byte arrangements
- Optionally do write-protection on selected sectors
- Optionally do read-protection on selected blocks
- Do specific device configurations for
Microchip PIC micros
- Setup counters so that your operator can
easily keep track of how many chips have been
programmed.
- Plus a whole lot more
FLEXIBLE MULTI-MODE OPERATIONS
- Convenient PC-controlled mode, via high speed USB 2.0, lends to easy
operation for the R&D and engineering environment.
- Stand-alone operation is provided by a built-in 6-key keyboard and a
4-line LCD display.
(Requires optional Compact Flash Card for storing programming algorithms
which are downloaded from PC to programmer. Once the programming algorithms
and data files are stored in the Compact Flash Card, the programmer can
be operated without connection to a PC.)
- The programming unit is light-weight and portable, good for
field applications and international travel (takes 100V to 240V AC).
USEFUL AS A PRODUCTION PROGRAMMER
- Putting multiple units together in stand-alone mode
creates a multi-site concurrent programming environment for volume
production. The advantages, over a traditional
gang programmer, are:
- Flexible and expandable: start with one unit and expand by adding more
units when the need arises.
- Less down time: in case of a failure of one unit, other units
can continue to operate.
- Concurrent programming: each chip begins to be programmed as soon
as it is inserted into a socket.
|
PROGRAMMER SPECIFICATIONS |
DEVICE SUPPORT
- Device (IC) Types Supported:
EPROM, Paged EPROM, Parallel and Serial EEPROM, FPGA Configuration
Serial PROM, FLASH Memory (NOR and NAND), Firmware HUB, EPLD,
CPLD, SPLD, Bipolar PROM, NOVRAM,
Microcontroller, Microchip PIC, MCU, Standard Logic, etc.
- Device Packages Supported on Standard Equipment:
DIP, SDIP.
- Device Packages Supported with Optional SMD Adapters:
PLCC, JLCC, SOIC, QFP, TQFP, VQFP, PQFP, TSOP, TSOPII,
SOP, SSOP, PSOP, TSSOP, SON, QFN, EBGA, FBGA, VFBGA,
µBGA, CSP, SCSP, etc.
Typical view of SMD programmer adapters:
HARDWARE & ELECTRICAL
- PC interface: High speed USB 2.0
- AC power supply: Input 100V-240V AC, 50/60 HZ.
Output 12VDC, 2 Amp.
- Programmer physical size: 8.5" x 5.8" x 4.75" high
(216mm x 149mm x 120mm)
- Net weight (programming unit, AC power supply and USB cable):
4.25 Lbs.
- Gross shipping weight: 10 Lbs.
WARRANTY
- 2-years. Programmer is warranted to be free of manufacturing
or workmanship defects for two (2) years from the date of purchase.
Warranty covers parts, labor, and free UPS ground shipping from
Advin back to customer. (Free ground shipping applies to 48-states
and Canada only).
INCLUDED ITEMS
- Programming unit with 48-pin DIP ZIF socket adapter.
- Convenient storage and carry case.
- AC power supply.
- USB Cable.
- Programmer-control software CD.
- User's Guide.
- Registration card and user-feedback form.
Back View
|
Programmer Carry case
|
Carry case inside view
|
USB cable
|
AC Power Supply
|
OPTIONAL ITEMS
(
SMD Adapters )
- Programmer adapters for different SMD device packages.
- Compact flash card for stand-alone operation.
|
Only $1875
Buy this universal programmer
List of other universal programmers
|
At your service: 1-888-GO-ADVIN
(462-3846 ),
408-243-7000
|
Email: Sales@Advin.com
|
|
" The
Customer
Must be
Happy "
Our programmers go places
|
| |
You can get a
programmer from
other vendors.
But ONLY Advin
can give you
knowledgeable
tech support.
We do NOT play
with things such
as batteries
or test meters.
Only chips and
programmers are
in our cup of tea.
Since 1986.
>
Help us to
Serve You Better
(20-second
anonymous feedback)
|
|
|
|
Cart
