Supports low voltage devices with Vcc as low as 1.2v.
Device types supported include flash memories, EPROMs,
PICs and other microcontrollers, and small logic devices.
Suppoprts standard DIP or skinny DIP packages from 8 to 48-pins
on standard equipment
Supports a wide variety of other packages such as PLCC, SOIC,
TSOP, etc., with reliable factory-made adapters.
Free software updates can be downloaded via Internet at any time.
Programming Speed
Very fast programming speed via USB interface.
Programs and verifies a 64M-bit NOR flash memory in 11.3 seconds
and a 64Mb EEPROM in 43 seconds.
The auto-start feature allows programming to start automatically
as soon as a chip is inserted.
Programming Speed Examples
Device Type
Device Manufacturer
Device Part #
Program and Verify
64Kb EEPROM
ATMEL
AT28C64B
0.9 SEC
128Kb SERIAL EEPROM
MICROCHIP
24AA128
4.5 SEC
20KB FLASH MCU
ATMEL
AT89C55
7.5 SEC
64Mb SPI EEPROM
SPANSION
S25FL064A
58.6 SEC
PIC MICRO
MICROCHIP
PIC16F876A
10.9 SEC
PIC MICRO
MICROCHIP
PIC18F442
6.2 SEC
Hardware Features
The programming unit has 48 universal pin-drivers built-in.
There is no need to add additional or optional pin-drivers
for programming devices of up to 48-pins.
Since each pin-driver is software programmable, proper voltage
levels will be applied to each and every pin, not just the Vcc pins,
allowing true low-voltage programming for low-voltage devices.
Light-weight and portable, good for field applications and
international travel (takes 110V to 240V AC).
Programming operation is conveniently controlled by a PC,
via high speed USB 2.0 interface.
Easy-to-use and Powerful Windows based S/W
Microsoft Windows XP and Vista compatible.
Pin continuity and reverse insertion checks help to prevent devices
from accidental damage.
Over-current and over-voltage protection ensures safety of the
devices and programmer hardware.
Auto-program command combines device operations like program, verify, security
into a single command at any user-selected sequence.
Project function simplifies operations. Settings such as device selection,
file selection, device configuration, program options can be saved into
project files, thus reducing multiple steps into a single operation.
Automatically recognizes file formats and detects large file offsets.
SPECIFICATIONS
DEVICE SUPPORT
Device Types Supported:
EPROM, Paged EPROM, Parallel and Serial EEPROM, FPGA Configuration
Serial PROM, FLASH Memory (NOR), EPLD, Firmware HUB,
Microcontroller, Microchip PIC, etc.
Device Packages Supported on Standard Equipment:
DIP, SDIP.
Updates are available by mail at a nominal charge.
HARDWARE & ELECTRICAL SPECIFICATIONS
PC interface: USB 2.0
AC power supply: Input 100V-240V AC, 50/60 HZ.
Output 12VDC, 2 Amp.
Programmer physical size: 7" x 5" x 1 3/8" high
(178mm x 127mm x 35mm)
Net weight (programming unit, AC power supply, USB cable): 1.5 Lbs.
Gross shipping weight: 4 Lbs.
WARRANTY
2-years. Programmer is warranted to be free of manufacturing
or workmanship defects for two (2) years from the date of purchase.
Warranty covers parts, labor, and free UPS ground shipping from
Advin back to customer. (Free ground shipping applies to 48-states
and Canada only).
INCLUDED ITEMS
Programming unit with 48-pin DIP ZIF socket adapter.
Cart
Supported Devices List
